IBM SAN768B, Installation, Service And User Manual, Page: 149 / 208

switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 11
switchId: fffc0b
switchWwn: 10:00:00:05:1e:39:59:67
zoning: OFF
switchBeacon: OFF
blade3 Beacon: OFF
blade5 Beacon: OFF
blade8 Beacon: OFF
blade10Beacon: OFF
Index Slot Port Address Media Speed State Proto
===========================================================
32
3 0 0b2000 id N4 Online L-Port 5 public
33 3 1 0b2100 __ N8 No_Module
34 3 2 0b2200 __ N8 No_Module
35 3 3 0b2300 __ N8 No_Module
36 3 4 0b2400 id N4 Online F-Port
10:00:00:00:c9:51:00:2d
37
3 5 0b2500 __ N8 No_Module
switch:admin>
4. Verify that all the IP address information is correct by entering the
ipAddrShow command and checking the results against the IP information
recorded in the config-miscinfo.txt file.
switch:admin> ipaddrshow
SWITCH
Ethernet IP Address: 10.32.50.12
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
CP0
Ethernet IP Address: 10.32.50.10
Ethernet Subnetmask: 255.55.0.0
HostName : cp0
Gateway Address: 10.32.40.1
CP1
Ethernet IP Address: 10.32.50.11
Ethernet Subnetmask: 255.55.0.0
HostName : cp1
Gateway Address: 10.32.40.1
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
switch:admin>switch:admin>
Reconnecting the system to the network and fabric
Attention: Refer to “Managing cables” on page 40 for information on how to
physically manage the arrangement of the cables within the SAN768B chassis, and
cautions on handling and routing the cables.
Refer to the cable routing information recorded in “Cable routing tables” on page
119 to ensure the correct cable connections in the steps below.
1.
Connect the CP blades to the local area network, one blade at a time.
a. Insert the appropriate Ethernet cables into each Ethernet port.
b.
Connect the other ends to an Ethernet 10/100/1000 Base-T LAN, if not
already connected.
Chapter 5. Removing and installing components
117