IBM SAN42B-R, Installation, Service And User Manual

Page: 76 / 96

Power supply specifications
Table 15 lists the specifications per power supply.
Table 15. Power supply specifications
Power
supply
model
Maximum
output
power
rating (DC)
Input
voltage Input line
frequency
Maximum
input
current
Input line
protection
Maximum
inrush
current
AC 1100W 1100 W 100 - 240 V
(nominal)
90 - 264 V
(range) 50 - 60 Hz
(nominal) 12-5 A Line Fused 40 A peak
for any
initial
current
surge at
cold or
warm start
Power consumption per chassis (typical configuration)
Table 16 lists the power specifications for a chassis with a typical configuration.
Table 16. Power consumption per chassis (typical configuration)
Configuration
Minimum number
of power supplies
@ 100 VAC input @ 200 VAC input
SR optics, fans at
nominal speed, 2
PSUs 2 x AC 1100 W 3.90 A
388 W
1524 BTU/hr 1.98 A
383 W
1307 BTU/hr
LR optics, fans at
nominal speed, 2
PSUs 2 x AC 1100 W 4.24 A
422 W
1440 BTU/Hr 2.19 A
423 W
1444 BTU/Hr
Power consumption chassis (maximum configuration)
Table 17 lists the power specifications for a chassis with a maximum configuration.
Table 17. Power consumption per chassis (maximum configuration)
Configuration
Minimum number
of power supplies
@ 100 VAC input @ 200 VAC input
SR optics, fans at
high speed, 2 PSUs 2 x AC 1100 W 4.56 A
454 W
1550 BTU/hr 2.34 A
452 W
1536 BTU/hr
LR optics, fans at
high speed, 2 PSUs 2 x AC 1100 W 4.94 A
492 W
1679 BTU/Hr 2.54 A
490 W
1672 BTU/Hr
Ethernet port specifications
Table 18. Ethernet port specifications
Port type Number of ports Description
40 GbE 2 Compatible with short range
(SR) and long range (LR)
optical QSFP+ transceivers
52
SAN42B-R Installation, Service, and User Guide