6
IBM Distributed Power Interconnect Rack Power Distribution Unit:Installation and Maintenance Guide
11. After you connect the power cords to properly wired and grounded dedicated
power sources, you can turn on the Rack PDU circuit breakers; then, connect
other devices in the rack cabinet to the power outlets on the Rack PDUs.
12. Route all the other power cables neatly, using the cable-management bracket if
installed, and secure the power cables with cable straps.
Note:
To route a power cable through the cable-management bracket, route the
cable through an opening in the bracket and against an upper or lower tab on the
bracket, as shown below. Use cable straps as required.
Tab
