7.14 1070 Video Memory
Note: See "System Board" in topic 8.5 for the location of the video
memory on the system board.
To replace video memory do the following:
1. Place the video-memory installation tool 1 (supplied with the
video-memory kit) over the video-memory socket.
2. With the beveled corner 2 facing the rear of the system, carefully
align the pins of the memory module with the openings in the socket
and firmly snap the module into place.
PICTURE 21
To remove video memory, pull straight up on the module with the
video-memory removal tool.
IBM PS/2 Model 90 XP 486 HMR
1070 Video Memory
¦ Copyright IBM Corp. 1990, 1991
7.14 - 1
