background image

 EDITION Edition Notice

 Safety Information

  

 Refer to the Hardware Maintenance Reference General Information

 pamphlet for the following information:

  

     General Safety

  

     Electrical Safety.

  

 Third Edition (October 1991)

  

 The following paragraph does not apply to the United Kingdom or any

 country where such provisions are inconsistent with local law:

 INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION

 "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,

 INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  Some states do

 not allow disclaimer of express or implied warranties in certain

 transactions, therefore, this statement may not apply to you.

  

 This publication could include technical inaccuracies or typographical

 errors.  Changes are periodically made to the information herein;

 these changes will be incorporated in new editions of the publication.

 IBM may make improvements and/or changes in the product(s) and/or the

 program(s) described in this publication at any time.

  

 It is possible that this publication may contain reference to, or

 information about, IBM products (machines and programs), programming,

 or services that are not announced in your country.  Such references

 or information must not be construed to mean that IBM intends to

 announce such IBM products, programming, or services in your country.

  

 Requests for technical information about IBM products should be made

 to your IBM Authorized Dealer or your IBM Marketing Representative.

  

 IBM may have patents or pending patent applications covering subject

 matter in this document.  The furnishing of this document does not

 give you any license to these patents.  You can send license

 inquiries, in writing, to the IBM Director of Commercial Relations,

 IBM Corporation, Purchase, NY 10577.

  

 ¦ Copyright International Business Machines Corporation 1990, 1991.

 All rights reserved.

 Note to U.S. Government Users -- Documentation related to restricted

 rights -- Use, duplication or disclosure is subject to restrictions

 set forth in GSA ADP Schedule Contract with IBM Corp.

IBM PS/2 Model 90 XP 486 HMR

Edition Notice

¦ Copyright IBM Corp. 1990, 1991

EDITION - 1

Summary of Contents for PS/2 90 XP 486
























































Reviews: