6.11 1055 System Board
Cover (1005)
Adapters (1010)
Retainer Plate (1065)
Diskette Drive (1025)
Hard Disk Drive (1020)
Control Assembly (1060)
Bus Adapter (1015)
Math Coprocessor, if installed (1045)
Memory Module Kits (1050).
1. Remove the cable shield 2 .
2. Disconnect all cables and remove screws 1 from the system board.
3. Lift the system board to clear the locating pin, then remove the
system board 3 from the system unit.
4. When a new system board is installed, use the backup copy of the
Starter Diskette to set the time and date, and to restore unique
configuration data.
PICTURE 19
IBM PS/2 Model 35 SX, 35 LS, 35 SLC HMR
1055 System Board
¦ Copyright IBM Corp. 1991, 1992
6.11 - 1
