IBM PS/2 35 SX Hardware Maintenance Reference Download

Page: 2 / 54

EDITION Edition Notice

Safety Information

Refer to the Hardware Maintenance Reference General Information

pamphlet in this manual for the following safety information:

General Safety

Electrical Safety.

Third Edition (March 1992)

+--------------------------------------------------------------------+

¦ The following paragraph does not apply to the United Kingdom or ¦

¦ any country where such provisions are inconsistent with local law: ¦

¦ INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS ¦

¦ PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS ¦

¦ OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ¦

¦ OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some ¦

¦ states do not allow disclaimer of express or implied warranties in ¦

¦ certain transactions, therefore, this statement may not apply to ¦

¦ you. ¦

¦ ¦

¦ This publication could include technical inaccuracies or ¦

¦ typographical errors. Changes are periodically made to the ¦

¦ information herein; these changes will be incorporated in new ¦

¦ editions of the publication. IBM may make improvements and/or ¦

¦ changes in the product(s) and/or the program(s) described in this ¦

¦ publication at any time. ¦

¦ ¦

¦ It is possible that this publication may contain reference to, or ¦

¦ information about, IBM products (machines and programs), ¦

¦ programming, or services that are not announced in your country. ¦

¦ Such references or information must not be construed to mean that ¦

¦ IBM intends to announce such IBM products, programming, or ¦

¦ services in your country. ¦

¦ ¦

¦ Requests for technical information about IBM products should be ¦

¦ made to your IBM Authorized Dealer or your IBM Marketing ¦

¦ Representative. ¦

¦ ¦

¦ IBM may have patents or pending patent applications covering ¦

¦ subject matter in this document. The furnishing of this document ¦

¦ does not give you any license to these patents. You can send ¦

¦ license inquiries, in writing, to the IBM Director of Commercial ¦

¦ Relations, IBM Corporation, Purchase, NY 10577. ¦

+--------------------------------------------------------------------+

¦ Copyright International Business Machines Corporation 1991, 1992.

Note to U.S. Government Users -- Documentation related to restricted

rights -- Use, duplication or disclosure is subject to restrictions

set forth in GSA ADP Schedule Contract with IBM Corp.

IBM PS/2 Model 35 SX, 35 LS, 35 SLC HMR

Edition Notice

¦ Copyright IBM Corp. 1991, 1992

EDITION - 1

Summary of Contents for PS/2 35 SX























































Search results

Summary of Contents for PS/2 35 SX

Reviews:

Related manuals for PS/2 35 SX

Brands by name

Popular brands

IBM PS/2 35 SX, Hardware Maintenance Reference

Search results

Summary of Contents for PS/2 35 SX

Reviews:

Related manuals for PS/2 35 SX

Brands by name

Popular brands