IBM Power Systems 8001-22C, Manual

Page: 34 / 138

3. To install a GPU in position 3, complete the following steps:
a. Retract the retaining pin (A) so the arrow is pointing to the system.
b. Lift the PCIe riser from the system.
c. Place the PCIe adapter riser on an ESD surface, with the PCIe adapter riser facing up.
d.
Remove the screws and the tail-stocks in position 3.
e. Insert the GPU (A) into the PCIe adapter riser (B) as shown in Figure 12.
f. Replace the screw to secure the tail-stock.
g. Plug the GPU power cable (A) into the system backplane as shown in Figure 13 on page 19. Using
your thumb, press the release latch on the connector to remove the cable.
Figure 11. 8001-22C PCIe adapter positions
Figure 12. Inserting the GPU into the riser
18
Power Systems: Installing the IBM Power System S822LC for Big Data (8001-22C)