IBM Power Systems 775, Manual

Page: 259 / 358

Chapter 4. Troubleshooting problems
245
"maxssh","8",,
"ppcmaxp","64",,
"ppcretry","3",,
"ppctimeout","0",,
"sharedtftp","1",,
"SNsyncfiledir","/var/xcat/syncfiles",,
"tftpdir","/tftpboot",,
"xcatdport","3001",,
"xcatiport","3002",,
"xcatconfdir","/etc/xcat",,
"timezone","EST5EDT",,
"useNmapfromMN","no",,
"enableASMI","no",,
"db2installloc","/mntdb2",,
"databaseloc","/db2database",,
"sshbetweennodes","ALLGROUPS",,
"dnshandler","ddns",,
"vsftp","y",,
"cleanupxcatpost","no",,
"useSSHonAIX","yes",,
"consoleondemand","yes",,
"domain","ppd.pok.ibm.com",,
"ntpservers","192.168.0.103",,
"teal_ll_ckpt","0","teal_ll checkpoint - DO NOT DELETE OR MODIFY",
"dhcpinterfaces","en2",,
"topology","8D",,
If there are security SSH or xCAT keys or certificates problems, proceed with the following
steps:
2. Verify whether
xdsh <node> date
runs without prompting for password.
3. Run the updatenode -k command to update the keys or certificates on the nodes as
shown in Example 4-3.
Example 4-3 To update the security keys for the node “
c250f06c10ap01
”
# updatenode c250f06c10ap01 -V -k
Enter the password for the userid: root on the node where the ssh keys
will be updated:
Running command on c250mgrs38-pvt: /bin/hostname 2>&1
Running command on c250mgrs38-pvt: ifconfig -a| grep "inet" 2>&1
Running internal xCAT command: makeknownhosts ...
Running command on c250mgrs38-pvt: cat //.ssh/known_hosts >
//.ssh/known_hosts.backup 2>&1
Running command on c250mgrs38-pvt: /bin/sed -e "/^c250f06c10ap01[,| ]/d;
/^10.6.10.1[,| ]/d;" //.ssh/known_hosts > /tmp/7013302 2>&1
Running command on c250mgrs38-pvt: cat /tmp/7013302 > //.ssh/known_hosts 2>&1
Running command on c250mgrs38-pvt: rm -f /tmp/7013302 2>&1