IBM Power Systems 775, Manual

Page: 234 / 358

220
IBM Power Systems 775 for AIX and Linux HPC Solution
The following commands from Table 3-6 on page 219 are used to check all the information
that is logged by TEAL:
򐂰 tlgpfsstatus
򐂰 tllsalert
򐂰 tllsckpt
򐂰 tllsevent
tlgpfsstatus
For this command, we list the help description that is shown in Figure 3-25.
Figure 3-25 tlgpfsstatus command flag description
The tlgpfsstatus command is used to query status from the database. The command
accesses the database and queries a series of tables to ascertain the status of different levels
according to the options that are given by user. The command must be executed on the EMS
side.
tllsalert
For this command, we list the help description that is shown in Figure 3-26 on page 221. A
typical output is shown in Example 3-59 on page 222.
tlchalert.log Command log files
tllsalert.log
tllschkpt.log
tllsevent.log
tlrmalert.log
tlrmevent.log
# tlgpfsstatus -h
Usage: ./tlgpfsstatus[{options}]
[options] can be any of
-g - print global status of all entities
-c - print status of all clusters
-n - print status of all nodes
-f - print status of all file systems
-d - print status of all disks
-s - print status of all storage pools
-t - print status of all filesets
-r - print status of all recovery groups
-a - print status of all declustered arrays
-p - print status of all pdisks
-v - print status of all vdisks
-e "colName=colValue" - expression to filter query result
-l - print detailed status of a entity
-h - print this message
Log file at
/var/log/teal Log file description