LED use for the 5888 or EDR1 PCIe storage enclosure
The components inside the 5888 or EDR1 PCIe storage enclosure can be identified by their physical
location code. In addition to the location code, most components have an identify light-emitting diode
(LED) that can be activated.
For an overview of using location codes, see 5888 or EDR1 PCIe storage enclosure.
For details about the 5888 or EDR1 locations, see 5888 or EDR1 storage enclosure locations.
For the location and description of the 5888 or EDR1 PCIe storage enclosure LEDs, see “5888 or EDR1
PCIe storage enclosure light-emitting diode (LED) locations..”
The identify indicator LEDs can be accessed from the following locations:
v
Hardware Management Console (HMC): Click
Operations
>
LED Status
>
Identify LED
v
AIX diagnostics: Type
diag > Task Selection > Identify and Attention Indicators
v
Linux: Type
/usrsbin/usysident -s identify -1<location code>
v
Advanced System Management Interface: Click
System Configuration
>
Service Indicators or
Indicators by Location Code
5888 or EDR1 PCIe storage enclosure light-emitting diode (LED)
locations.
Use this information to identify the LEDs on the 5888 or EDR1 PCIe storage enclosure.
Figure 39 shows the location of LEDs on the front of the 5888 or EDR1 PCIe storage enclosure.
Figure 40 on page 35 shows the location of LEDs on the rear of the 5888 or EDR1 PCIe storage enclosure.
Figure 39. LED locations
34
Power Systems: Service information for the PCIe storage enclosures
Summary of Contents for Power System 5888
