IBM POWER GXT110P, Installation And User Manual

Page: 21 / 28

2. If the GXT110P device driver is installed, the following is an example of the data
that appears if you are running AIX Version 4.1.5.
devices.pci.33531188.X11 4.1.5.ð COMMITTED AIXwindows GXT11ðP Graphics
devices.pci.33531188.diag 4.1.5.ð COMMITTED GXT11ðP Graphics Adapter
devices.pci.33531188.rte 4.1.5.ð COMMITTED GXT11ðP Graphics Adapter
3. If the POWER GXT110P device driver did not install, return to Chapter 3,
“Installing Device Driver Software” on page 3-1.
Check Console
1. If you continue to experience problems, it may be necessary to redirect the
device console to the new adapter using the chdisp command. Refer to your
operating system documentation for directions.
2. If you have checked your cables, tried the chdisp command and continue to
experience problems, run diagnostics. Refer to your operating system
documentation for directions.
Verify Hardware Installation
1. To verify your system unit recognizes the POWER GXT110P adapter:
Ÿ
Type:
lsdev -Cs pci
and press Enter.
2. If the POWER GXT110P adapter did install, the following is an example of the
data that appears on your screen:
igað Available ð4-ð2 GXT11ðP Graphics Adapter
3. If the message on your screen indicates your adapter is Defined instead of
Available, shut down your machine. Check the POWER GXT110P adapter to
insure it is installed correctly.
4. If the POWER GXT110P adapter did not install, return to Chapter 4, “Installing
Hardware” on page 4-1.
If you continue to experience problems, it may be necessary to call your system
support organization. Refer to your operating system documentation for directions.
Chapter 4. Installing Hardware
4-3