background image

Chapter 1. General description 

13

EPMA

One processor activation for processor FC EPM0: 
Each occurrence of this feature permanently activates one processor 
on Processor Card FC EPM0. One processor activation for processor 
feature FC EPM0 with inactive processors.

AIX
IBM i
Linux

EPMW

Processor CoD utility billing for FC EPM0, 100 processor-minutes: 
Provides payment for temporary use of processor feature FC EPM0 
with supported AIX or Linux operating systems. Each occurrence of this 
feature will pay for 100 minutes of usage. The purchase of this feature 
occurs after the customer has 100 minutes of use on processor cores 
in the shared processor pool that are not permanently active.

AIX
Linux

EPMX

Processor CoD utility billing for FC EPM0, 100 processor-minutes:
Provides payment for temporary use of processor feature FC EPM0 
with supported IBM i operating systems. Each occurrence of this 
feature will pay for 100 minutes of usage. The purchase of this feature 
occurs after the customer has 100 minutes of use on processor cores 
in the shared processor pool that are not permanently active.

IBM i

EPME

One processor-day on/off billing for FC EPM0:
After an On/Off Processor Enablement feature is ordered and the 
associated enablement code is entered into the system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is then provided to your sales channel. 
The sales channel will place an order for a quantity of On/Off Processor 
Core Day Billing features and bill you. One FC EPME must be ordered 
for each billable processor core day of feature FC EPM0 used by a 
supported AIX or Linux operating system.

AIX
Linux

EPMF

One processor-day on/off billing for FC EPM0:
After an On/Off Processor Enablement feature is ordered and the 
associated enablement code is entered into the system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is then provided to your sales channel. 
The sales channel will place an order for a quantity of On/Off Processor 
Core Day Billing features and the client will be charged. One FC EPMF 
must be ordered for each billable processor core day of feature FC 
EPM0 used by a supported IBM i operating system.

IBM i

EPMN

On/off processor CoD billing, 100 processor-days, for FC EPM0

AIX
Linux

EPMP

On/off processor CoD billing, 100 processor-days, for FC EPM0

IBM i

EP9T

90-day temporary on/off processor enablement

AIX
IBM i
Linux

EPM1

0 to 16-core 3.8 GHz  processor card:
16-core 3.8 GHz  CUoD processor planar containing two 
8-core processors. Each processor has 2 MB of L2 cache (256 KB per 
core) and 32 MB of L3 cache (4 MB per core). There are 16 DDR3 
DIMM slots on the processor planar (8 DIMM slots per processor), 
which can be used as capacity on demand (CoD) memory without 
activating the processors. The voltage regulators are included in this 
feature code.

AIX
IBM i
Linux

Feature 
code

Description

OS 
support

Summary of Contents for Power 780





























































































































































































































Reviews: