IBM PCI SCSI-2 Fast/Wide Single-Ended Adapter, Installation Manual, Page: 17 / 42

Windows NT (PowerPC Edition) Device Driver Installation - Version 3.51
This procedure installs the NCRSDMS.SYS driver for SCSI devices.
1. Log on to Windows NT (PowerPC Edition) as an Administrator.
2. Double-click on the Main program group icon.
3. Double-click on the Windows NT Setup icon.
4. Select Options.
5. Select Add/Remove SCSI Adapters.
6. Select Add.
7. On the SCSI Adapter list, go to the bottom and select NCR PCI (53c810).
Note: Do not change the path to the OEM SCSI adapter files.
8. Select Continue.
9. After selecting the driver, a window appears prompting whether or not tagged
command queueing is desired. If so, click on OK, otherwise click on Cancel.
10. On the SCSI Adapter Setup menu, click on Close.
11. Reboot Windows NT (PowerPC Edition) to load the driver.
Windows NT (PowerPC Edition) Device Driver Installation - Version 4.0
On Windows NT (PowerPC Edition) Version 4.0, the device driver for this option is
automatically installed by the operating system after the SCSI adapter is installed
and the operating system rebooted.
Chapter 4. Installing, Configuring, and Verifying Software
4-3