IBM PCI SCSI-2 Fast/Wide Single-Ended Adapter, Installation Manual

Page: 16 / 42

5. The Install/Configure Devices Added After IPL screen is displayed. The
"INPUT device/directory for software" option is highlighted.
6. You can either:
Ÿ
Press F4 to display a list of input devices from which you can select. Then
select the appropriate device and press Enter.
Ÿ
Enter the input device you are using in the entry field where the cursor is
positioned.
7. The following occurs when the COMMAND STATUS screen is displayed:
Ÿ
The term
RUNNING
is highlighted to indicate that the install and configure
command is in progress.
Ÿ
When
RUNNING
changes into
OK
, scroll down to the bottom of the page and
locate the Installation Summary.
Ÿ
At the bottom of the page, if the installation was successful,
SUCCESS
appears
in the Result column of this summary.
8. Remove the installation media from the drive.
9. Press F10 to exit SMIT.
10. At the prompt type:
shutdown -Fr
and press Enter.
This shuts down and reboots your system.
11. AIX configures the adapter automatically when the system reboots. Return to
the "Verifying Software Installation" instructions to verify your PCI SCSI-2
Fast/Wide Single-Ended Adapter is available for use.
4-2
PCI SCSI-2 Fast/Wide Single-Ended Adapter Installation Guide