IBM PCI SCSI-2 Fast/Wide Single-Ended Adapter, Installation Manual

Page: 14 / 42

4. Install the PCI SCSI-2 Fast/Wide Single-Ended Adapter into any available PCI
slot.
After all your internal SCSI devices and the adapter are installed, replace your
system unit covers as described in the system unit documentation.
Connecting External SCSI Devices
At this time the adapter should be installed and the system covers back on.
To connect external devices:
1. Connect the 68-pin connector to the external port (J2). Use the fastening screws
on the cable connector to securely attach the connector to the adapter.
2. Connect the other end of the cable to your SCSI device.
3. If necessary, connect additional cables to additional SCSI devices.
4. When all devices are connected, ensure that a SCSI terminator is attached to the
last device.
Diagnostics
Diagnostics may be supplied with your device driver, or may be found in a separate
package. Refer to your system unit documentation for more information about
running diagnostics.
3-2
PCI SCSI-2 Fast/Wide Single-Ended Adapter Installation Guide