IBM PCI Dual Channel Ultra3 SCSI Adapter, Installation And Using Manual

Page: 12 / 42

SCSI Connectors
The adapter has the following external and internal connectors:
v
External connectors:
– Channel A (J2), Channel B (J3), 68-position, VHDCI (very high density cable
interconnect)
v
Internal connectors:
– Channel B (J4), Channel A (J6), 68-position, high-density plastic D-shell SCSI
standard connector for 16-bit attachment
Connectors J2 and J6 are connected as Channel A. Connectors J3 and J4 are
connected as Channel B.
Attention: Simultaneous use of internally and externally attached devices on the
same channel is not supported with this adapter. The following figure shows the
external and internal channels.
PCI Dual Channel Ultra3 SCSI Adapter
Note: The adapter has built-in SCSI terminators on each channel that are automatically
enabled when a cable is attached to either the external or internal connector.
Software Requirements
The PCI Dual Channel Ultra3 SCSI Adapter is supported on AIX Version 4.3.3.x and
5.1.x or higher with updates.
Channel B (J4)
Channel B (J3)
Channel A (J6)
Channel A (J2)
2
Installation and Using Guide