Hardware Installation 2-7
2.9 Setting the RTC Configuration
The NuPRO-630 provides a setting for the selection of the RTC Clear Jumper by
JP4 setting as following:
l
CMOS Setting of JP4:
CMOS Clear Jumper
JP4
Normal
* OFF
Clear CMOS
ON
2.10 System Memory DRAM
The NuPRO-630 provides a wide range on-board DRAM memory by three
pieces DIMM sockets (DIMM-1, DIMM-2, DIMM-3) request the access time
should meet PC-100 standard.. The maximum capacity of the on board memory
is 1.5GBytes.
See the figure on section 2.3 for get the identifying the banks.
2.11 ATX/AT Power Select
The NuPRO-630 provides a selection by a three-pin jumper JP8 for setting the
power supply type in using.
l
ATX/AT Power Select Setting of JP8:
Power Supply In Using
JP8
AT Power Supply
* 2-3
ATX Power Supply
1-2
