v
PCI Wake Up: If this setting is enabled, your computer turns on in response
to wake up requests from PCI devices that support this feature.
To set automatic power-on features, follow these steps:
1.
Start the Configuration/Setup Utility program (see “Starting and using the
Configuration/Setup Utility program” on page 29).
2.
Select
Power Management
and press Enter.
3.
Select
Automatic Power On
and press Enter.
4.
Select the menu item for the feature you want to set. Select either
Enabled
or
Disabled
. Press Enter.
5.
Select
Startup Sequence
for the feature. Select either
Primary
or
Automatic
.
If you select Automatic, make sure
Automatic Power On Startup Sequence
in the Startup Sequence menu is set to
Enabled
. Otherwise, the system will
use the Primary Startup Sequence.
6.
Press Esc until you return to the Configuration/Setup Utility program
menu.
7.
Select
Save Settings
from the Configuration/Setup Utility program menu
and press Enter. Then press Esc and follow the instructions on the screen to
exit from the Configuration/Setup Utility program.
42
User Guide
Summary of Contents for NetVista A40
