IBM NetVista 6029, Hardware Maintenance Manual

Page: 39 / 136

7. Replace any adapters that were removed to gain access to the battery. See
“Installing and removing adapters” on page 27 for instructions for replacing
adapters.
8.
Replace the cover, and plug in the power cord. See “Replacing the cover and
connecting the cables”.
Note: When the computer is turned on for the first time after battery
replacement, an error message might be displayed. This is normal after
replacing the battery.
9. Turn on the computer and all attached devices.
10. Use the Configuration/Setup Utility program to set the date and time and any
passwords.
Replacing the cover and connecting the cables
After working with options, reinstall any removed parts, replace the cover, and
reconnect any cables, including telephone lines and power cords. Also, depending
on the option that is installed, you might need to confirm the updated information
in the Configuration/Setup Utility program.
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer.
2.
Clear any cables that might impede the replacement of the cover.
Chapter 5. Installing Options
33