IBM Netfinity ServeRAID-4L Ultra160 User Reference Download Page 22

Page: 22 / 114

Connecting external devices

Note: The ServeRAID-4x controller does not support configurations that use both

the internal and external connectors on the same channel concurrently. For
example, you cannot use both external Channel 1 and internal Channel 1.

To attach SCSI devices to an external channel connector on the ServeRAID
controller:

1. Connect one end of a 68-pin very high density connector interface (VHDCI)

SCSI cable to an external channel connector on the ServeRAID controller.

Note: See “Connector locations” on page 3 for the channel connector locations.

2. Connect the other end of the SCSI cable to the external SCSI device.

3. Continue with “Updating BIOS and firmware code” on page 23.

Figure 4. Connecting a ServeRAID-4H controller external channel connector

IBM

Netfinity

: ServeRAID

™

-4L Ultra160 SCSI Controller User’s Reference

Summary of Contents for Netfinity ServeRAID-4L Ultra160


















































































































Search results

Summary of Contents for Netfinity ServeRAID-4L Ultra160

Reviews:

Related manuals for Netfinity ServeRAID-4L Ultra160

Brands by name

Popular brands

IBM Netfinity ServeRAID-4L Ultra160, User Reference

Search results

Summary of Contents for Netfinity ServeRAID-4L Ultra160

Reviews:

Related manuals for Netfinity ServeRAID-4L Ultra160

Brands by name

Popular brands