ServeRAID ISPR, BCS, and ECS POST error codes
After the ServeRAID POST completes, register information appears on the screen
in hexadecimal format, as follows:
Hardware: ISPR=aaaa BCS=bb ECS=cc
ISPR displays the four-digit Interrupt Status Report Register code, BCS displays the
Basic Configuration Status Register code, and ECS displays the Extended
Configuration Status Register code.
For example:
Controller 1 Slot 5, Status:Not responding properly - Error Code=0B0
Controller 2 Slot 4, Logical Drive=0, Other=0, Firmware=2.88.10, Status=Ok
Controller 3 Slot 3, Logical Drive=0, Other=0, Firmware=3.60.13, Status=Ok
Controller 4 Slot 2, Logical Drive=1, Other=1, Firmware=1.00.09, Status=Ok
If no errors occur:
ISPR (aaaa) = EF10
BCS (bb) = 0F or 09
ECS (cc) = 00
If an error occurs, refer to: “ISPR (Interrupt Status Port Register) codes” for the
ISPR error codes and “Basic and Extended Configuration Status Register Codes”
on page 132 for the BCS and ECS error codes.
ISPR (Interrupt Status Port Register) codes
Code
Explanation
Action
1xxx to
7xxx
The POST detected an internal error.
Have the system serviced.
2601 to
260B
The POST detected an error with the
ServeRAID subsystem.
Have the system serviced.
2610
The POST detected an error with the
ServeRAID controller hardware.
Have the system serviced.
2620
The POST detected that a ServeRAID
configuration or hard disk error
occurred.
Start the IBM ServeRAID Support CD
and view the existing device and
configuration information for your
ServeRAID subsystem. If you cannot
locate and correct the configuration
problem or the failing device, or if the
problem persists, have the system
serviced.
8xxx to
Bxxx
The POST detected an error with the
SCSI interface.
Verify that the SCSI cables are correctly
connected and the SCSI termination is
set properly for each installed SCSI
device.
If you cannot locate and correct the
SCSI problem, or if the problem
persists, have the system serviced.
Chapter 12. Solving ServeRAID problems
131
Summary of Contents for Netfinity ServeRAID-4H Ultra160
