IBM Netfinity FAStT500, Installation Manual

Page: 36 / 83

20 IBM Netfinity FAStT500 RAID Controller Enclosure Unit Installation Guide
2 Remove both screws from the top cover of the controller; then, lift the cover and set it
aside to install after you upgrade your cache.
3 Locate the empty DIMM socket in front of the populated one that contains the standard
256 MB cache memory module. Make sure that both DIMM latches are open to their
outermost position before inserting the new memory module.
4 Carefully insert the DIMM into the empty socket, making sure that the left and right
edges of the module slide inside the grooves in the DIMM latches. As you push the
DIMM into place, the DIMM latches slowly close around the new module.
Controller
Top cover
Top cover
screws
DIMM latches in open position
Standard 256 MB
cache module
Upgrade 256 MB
cache module