IBM Netfinity 5100 8658 1RY, Manual

Page: 190 / 246

Power error messages
Message Action
Power supply
″
X
″
current fault
(level-critical; excessive
current demand on
power supply
″
X
″
)
1. See “Power checkout” on
page 36.
Power supply
″
X
″
DC
good fault (level-critical;
power good signal not
detected for power
supply
″
X
″
)
1. Replace power supply
″
X
″
Power supply
″
X
″
fan
fault (level-critical; fan
fault in power supply
″
X
″
)
1. Replace power supply
″
X
″
Power supply
″
X
″
fault
(level-critical; overcurrent
condition exists)
1. See “Power checkout” on
page 36.
Power supply
″
X
″
12V
fault (level-critical;
overcurrent condition
detected)
1. See “Power checkout” on
page 36.
Power supply
″
X
″
3.3V
fault (level-critical; 3.3V
power supply
″
X
″
had an
error)
1. See “Power checkout” on
page 36.
Power supply
″
X
″
5V
fault (level-critical; 5V
power supply
″
X
″
had an
error)
1. See “Power checkout” on
page 36.
System over
recommended
″
X
″
current
(level-non-critical;
system running too
much current on that
voltage)
1. See “Power checkout” on
page 36.
System running
non-redundant power
(level-non-critical;
system does not have
redundant power)
1. Add another power supply
2. Remove options from system
3. System can continue to operate
without redundancy protection if 1
and 2 above are not followed.
System under
recommended voltage
for
″
X
″
v (level-warning;
indicated voltage supply
under nominal value;
value for
″
X
″
can be
+12, -12, or +5)
1. Check connections to power
subsystem
2. Replace power supply
3. Replace power backplane
180
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY