IBM Netfinity 5100 8658 1RY, Manual

Page: 131 / 246

v Screen View
v
Security Manager
v Serial Connection Control
v Service Configuration Manager
v Service Processor Manager
v
Service Manager
v Software Inventory
v System Diagnostics Manager
v
System Information Tool
v System Monitor
v System Partition Access (requires System Partition)
v
Update Connector Manager (available only on
systems running Windows NT 4.0 or later)
v System Profile
v
Web Manager Configuration (installed only if the
Netfinity Manager Installation with Web
Enhancement installation configuration is selected)
Note: The graphical user interface (GUI) program
files for DMI Browser, ECC Memory Setup,
System Partition Access, RAID Manager, and
Predictive Failure Analysis will be installed
regardless of whether the system has a DMI
Service Layer, ECC Memory, a System
Partition, a RAID adapter, or a PFA-enabled
disk drive. This enables a network
administrator to remotely access these
services on other systems within a network.
However, the installation program installs the
base program that enables local use of the
service only if the required hardware or system
configuration is present.
9. Configure the Network Drivers.
If the installation configuration allows for network
access, enter information regarding the
communication protocols that are supported by the
system. The Network Driver Configuration window will
Netfinity Manager
121