IBM Netfinity 3500, User Handbook Manual, Page: 172 / 294

Ethernet Controller Messages
Table 10 (Page 1 of 3). Ethernet Controller Messages
Error Code Description
RPL-ROM-ERR: 100 The integrated Ethernet controller
cannot be found.
RPL-ROM-ERR: 101
The integrated Ethernet controller was
unable to initialize.
RPL-ROM-ERR: 102
The integrated Ethernet controller could
not be reset controller.
RPL-ROM-ERR: 103
There are multiple Ethernet controllers
or adapters in the system. Specify the
correct serial number in the NET.CFG
file.
RPL-ROM-ERR: 104
The integrated Ethernet controller
EEPROM is faulty or not present.
RPL-ROM-ERR: 106
The integrated Ethernet controller is
configured for Plug and Play in a
non-Plug and Play system.
RPL-ROM-ERR: 110
The integrated Ethernet controller RAM
failed the memory test.
E61
Service boot (startup) canceled; that is,
the boot diskette image was not
downloaded from the network.
E62
Cannot initialize controller.
E63
Cannot initialize controller.
E67
Cannot initialize controller.
E6d
Cannot find boot protocol (BOOTP)
server.
E6e
Cannot start from downloaded image.
E71
Too many multicast trivial file transfer
protocol (MTFTP) packages.
M10
Address resolution protocol (ARP)
canceled by keystroke.
154
Netfinity 3500 User's Handbook