IBM MTM 2145-12F, Hardware Installation Manual

Page: 45 / 214

▌1▐
10 Gbps Ethernet fault LEDs.
▌2▐
10 Gbps Ethernet link LEDs.
SAN Volume Controller 2145-SV1 connectors
The SAN Volume Controller 2145-SV1 includes multiple external connectors for
data, video, and power.
Figure 11 shows the external connectors on the SAN Volume Controller 2145-SV1
back panel assembly.
▌1▐
Power supply 1
▌2▐
Power supply 2
▌3▐
Video port
▌4▐
Serial port (not used)
▌5▐
Rear USB port 1
▌6▐
Rear USB port 2
▌7▐
Unused Ethernet port
▌8▐
10 Gbps Ethernet port 1
▌9▐
10 Gbps Ethernet port 2
▌10▐
10 Gbps Ethernet port 3
▌11▐
Technician port (Ethernet)
Figure 12 on page 12 shows the type of connector that is on each power-supply
assembly.
1
2
4
5
3
7
8
6
12
sv100009
1
2
Figure 10. Ethernet port LEDs on a 10 Gbps Ethernet adapter
1
2
4
5
3
7
8
6
12
sv100010
3 4 5 6 7 8 9 1 2 10 11
Figure 11. Connectors on the rear of the SAN Volume Controller 2145-SV1
Chapter 1. Preparing to install the SAN Volume Controller
11