IBM Medium J11 Hardware Installation And Maintenance Manual Download

Page: 52 / 104

6. Take the right outer rail subassembly in hand, and flip it over (rotate it 180º along its longitudinal

axis).

7. Using the quantity-4 panhead screws provided with the CMA kit, attach the CMA attachment bracket

to the rear end of the outer slide, on its outside surface. The images below show the progression of

steps from left to right.

8. Insert the right rail subassembly into the rack. Attach the adjustable rear mounting bracket to the rail

first, ensuring that the rail subassembly occupies the lower 2U portion of the allotted 4U space. The

rear mounting bracket spring will clip onto the rail. Ensure that the quantity-2 all-in-one rail kit

mounting hardware fully seats into the rack post mounting hole.

32 IBM Cloud Object Storage System: Medium/Large J11/J12 Disk Enclosure Hardware Installation and

Maintenance Manual

Summary of Contents for Medium J11









































































































Search results

Summary of Contents for Medium J11

Reviews:

Related manuals for Medium J11

Brands by name

Popular brands

IBM Medium J11, Hardware Installation And Maintenance Manual

Search results

Summary of Contents for Medium J11

Reviews:

Related manuals for Medium J11

Brands by name

Popular brands