IBM J15, Manual

Page: 33 / 142

Chapter 2. Installing the system hardware
After verification that you have all of the hardware components that you require, you can install them.
You completed the initial steps of verifying the shipping contents and becoming familiar with the
hardware components. You verified that the power and environmental requirements are met and planned
the location of the enclosures. You are now ready to begin installing the hardware components and
connecting the data cables and power cords.
Installing a 5U92 disk enclosure
Before you start the installation process, review the procedures; ensure you follow them in the order they
are presented.
1. Familiarize yourself with the safety and weight considerations for the disk enclosure.
2. Review the installation checklist.
3. Remove the parts from the shipping container.
4. Remove parts to reduce the weight of the enclosure
5. Install the enclosure in the rack by using the provided support rails.
6. Install the fascia.
7. Install the drives.
8. Install the cable management arm.
9. Connect the SAS disk enclosures to the system.
You will need the following items:
• Three or more persons or a lifting device to support the enclosure
• Box cutter
• Screw driver
• Two 16 A Power distribution units (PDU) IEC 60320 J and power cables
Safety notices and considerations
Before you install, service, or move a 5U92 disk enclosure, always read and follow the safety notices and
guidelines.
Safety notices
Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the
matching translated notice in IBM Systems Safety Notices.
DANGER: Serious injury or death can occur if loaded lift tool falls over or if a heavy load falls off the
lift tool. Always completely lower the lift tool load plate and properly secure the load on the lift tool
before moving or using the lift tool to lift or move an object. (D010)
DANGER: Multiple power cords. The product might be equipped with multiple AC power cords or
multiple DC power cables. To remove all hazardous voltages, disconnect all power cords and
power cables. (L003)
©
Copyright IBM Corp. 2021 5