IBM INTELLISTATION E PRO 6214, User Manual

Page: 48 / 162

32
IBM® IntelliStation® E Pro: User’s Guide
Enter. If you do not want to save your changes, select Exit the Setup Utility without
saving and press Enter.
If you want to save a change, but you do not want to leave the IBM Setup Utility
program, select
Save Settings and press Enter.
You can select Restore Settings to load previous values for all Setup items, or your
can
Load Default Settings for the computer.
Using the SCSISelect Utility program (some models)
SCSISelect is a built-in, menu-driven configuration utility program that you can use for
models that come with a SCSI adapter to:
• View the default SCSI IDs
• Locate and correct configuration conflicts
• Perform a low-level format on a SCSI hard disk
The following sections provide the instructions needed to start the SCSISelect Utility
program and descriptions of the menu choices available.
Starting the SCSISelect Utility program
To start the SCSISelect utility program:
1. Turn on the computer.
2. When the <<< Press <CTRL><A> for SCSISelect™ Utility! >>> prompt appears,
press Ctrl+A.
Note: If an administrator password has been set, a prompt appears asking you
to type the password to start the SCSISelect Utility program.
3. When the Would you like to configure the host adapter or run the SCSI
disk utility? question appears, make your selection and press Enter.
4. Use the arrow keys to select a choice from the menu.
• Press Esc to return to the previous menu.
• Press the F5 key to switch between color and monochrome modes (if your
monitor permits).
5. Follow the instructions on the screen to change the settings of the selected items,
and press Enter.
SCSISelect menu choices
The following choices appear on the SCSISelect Utility menu:
• Configure/View Host Adapter Settings
Select this choice to view or change the SCSI controller settings. To reset the
SCSI controller to its default values, press F6; then, follow the instructions that
appear on the screen.