IBM IntelliStation A Pro 6224, Hardware Maintenance Manual And Troubleshooting Manual

Page: 39 / 172

Replacing the support bracket
When working with some devices, such as hard disk drives, adapters, and memory
modules, you must first remove the support bracket to access the device.
Complete the following steps to remove the support bracket:
1. Read the safety information in Appendix B, “Safety information,” on page 117,
and the guidelines in “Handling static-sensitive devices” on page 25.
2. Remove the side cover (“Replacing the side cover” on page 27).
3. Pull out on the rear end of the support bracket approximately 150 mm (6 in.)
(see Figure 8).
4. Disengage the front end of the support bracket from the computer and set the
bracket aside.
To reinstall the support bracket, reverse the previous steps.
1394
Figure 8. Support bracket
Chapter 4. Customer replaceable units
29