manualshive.com logo in svg

IBM Infoprint Color 8, User Manual

Share
Download
IBM Infoprint Color 8 User Manual Download Page 27

27

Setting Automatic Tray Switching

To activate this feature:
1. Press 

Online

.

The printer goes offline.

2. Press 

Tray Select

.

3. Press 

Menu 1

 to move to the AUTO

TRAY SWITCH item.

6. Press 

©

 once.

The selection changes to ON.

7. Press 

Enter

 to register the change.

An asterisk appears next to ON.

8. Press 

Online

 to exit the Menu Mode.

Important!

Size settings made in your applica-

tion software will override the

printer’s operator panel settings.

To increase the paper feed capacity, you

can set your printer to automatically feed

paper from the front feeder or from the

optional High Capacity Second Paper Tray

when the paper tray is empty.
When this feature is active, if all paper

sources have the same paper size selected,

the printer normally feeds paper in the

following sequence:
(1) Paper Tray 1
(2) Optional Paper Tray 2
(3) Front Tray
If the paper source has a different paper

size selected, it is skipped.

Summary of Contents for Infoprint Color 8





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands