IBM Infoprint Color 8 Page 45 User Manual Download

Page: 45 / 220

Display Messages

Messages on the display panel show the status of the printer. This list gives an explanation of
each message and what you should do, if anything.

If these procedures do not solve the problem,

click here for information on how to get

service and support.

Click a category for details:

•

Normal operation:

No action necessary.

•

Maintenance:

Replace consumables as indicated.

•

Problems:

Take action as indicated.

•

Call for Service:

Printer needs service if turning the printer off and then on again

does not clear the message.

Summary of Contents for Infoprint Color 8





























































































































































































































Search results

Summary of Contents for Infoprint Color 8

Reviews:

Related manuals for Infoprint Color 8

Brands by name

Popular brands

IBM Infoprint Color 8, User Manual

Search results

Summary of Contents for Infoprint Color 8

Reviews:

Related manuals for Infoprint Color 8

Brands by name

Popular brands