IBM iL2215, User Manual

Page: 22 / 78

Using the remote control
To control the computer mouse from the projector remote control or keypad,
you must connect the mouse connector on the computer cable to the
computer.
The projector comes with a remote control that has four function buttons, a
disk mouse, and two mouse buttons (one on the top of the remote and one on
the bottom).
Point the remote control at the projection screen or at the front of the
projector. The range for optimum operation is approximately 25 feet. If you
point the remote control at the projection screen, the distance to the screen
and back to the projector must be less than or equal to 25 feet. For best
results, point the remote control directly at the projector.
Note: If the remote control is inactive for several minutes, it “sleeps” to
conserve battery life. Press any button except the disk mouse to
reactivate the remote control.
1
Disk mouse
2
Right mouse button
3
Left mouse button
Press anywhere on the edge of the disk mouse to move the cursor on the
screen. You can move the cursor at any angle by pressing the corresponding
edge of the disk. The mouse button on the top of the remote control simulates
your computer right mouse button; the button on the bottom simulates your
computer left mouse button. See “Using the keypad and remote control
buttons” on page 14 for a description of the four function buttons. If you are
12
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide