IBM IBM 802.11a/b/g Wireless CardBus Adapter, User Manual

Page: 20 / 62

Viewing or changing display settings
To view or change the IBM Client Utility settings, click Display Settings in the
Options menu to open the Display Settings window, as shown below.
In the window, you have the following options:
v
Signal Strength Display Units enables the signal strength to be displayed as a
percentage or as decibels.
v
Refresh Interval specifies the number of seconds that elapse before the display
is updated (or “refreshed”). You can specify a refresh time from one to 30
seconds.
v
Data Display enables statistical data to be shown relatively or cumulatively.
– Relative displays the change (delta) in statistical data since the last update.
– The Current Status tab has an Advanced button that you can click to view
advanced status information
You must click OK after making your selections.
Viewing status information
The Current Status tab shows general information about the CardBus adapter. The
following figure shows an example of this tab.
12
802.11a/b/g Wireless CardBus Adapter: User’s Guide