IBM G8316, Installation Manual

Page: 38 / 84

6. Connect all cables.
7. Initialize the switch, see Chapter 4, “Initializing the RackSwitch,” on page 43.
Attention: If this is a switch replacement, make sure the VPD is updated to
avoid losing the licensed electronic entitlement data of the RackSwitch. For
more information, see “Configuring Vital Product Data after a switch
replacement” on page 40.
Installing the RackSwitch in the IBM System x
®
or Power rack
This section provides how to install the RackSwitch in an IBM System Networking
Adjustable 19” 4-post rail kit (for Power and System x racks). For information about
mounting the RackSwitch in other rack types, see the following sections:
v “Installing the RackSwitch in the standard equipment rack” on page 17
v
“Installing the RackSwitch in the IBM iDataPlex rack” on page 20
The IBM System Networking adjustable 19” 4-post rail mount kit parts must be
purchased separately.
The following table lists the parts included in the IBM System Networking adjustable
19” 4-post rail mounting kit.
Table 14. IBM System Networking adjustable 19” 4-post rail mount kit parts
Item number Description Quantity
1 Label 1
2 M6 locking washers 8
3 M3 screws 4
4 M6 screws 8
5 M6 clip nuts 8
6 M6 cage nuts 8
7 M4 screws 16
8 Filler plate 1
9 Switch front bracket 2
10 Rear mounting bracket 1
11 Rear mounting bracket with
cord exit 1
DANGER
Rack-mounted devices are not to be used as shelves or work spaces.
(L002)
22
IBM System Networking RackSwitch G8316, Type 8036 and Type 1611-16E: Installation Guide