IBM FC5022, Product Manual

Page: 14 / 19

IBM Flex System FC5022 16Gb SAN Scalable Switches 14
Cabling requirements
Table 9 lists the cables required for the switch.
Table 9. FC5022 cabling requirements
Transceiver Cable Connector
16 Gb Fibre Channel
16 Gb FC SW SFP+ Module 850 nm multimode fiber cable (50 µ or 62.5 µ) up to 100 m LC
16 Gb FC LW SFP+ Module 1310 nm single-mode fiber cable (9 µ) up to 10 km LC
8 Gb Fibre Channel
8 Gb FC SW SFP+ Module 850 nm multimode fiber cable (50 µ or 62.5 µ) up to 150 m LC
8 Gb FC LW SFP+ Module 1310 nm single-mode fiber cable (9 µ) up to 10 km LC
8 Gb FC ELW SFP+ Module 1310 nm single-mode fiber cable (9 µ) up to 25 km LC
Management ports
External 1 GbE
management port
UTP Category 5, 5E, and 6 up to 100 meters RJ-45
External RS-232
management port
DB-9-to-mini-USB or RJ-45-to-mini-USB console cable (comes with
optional Management Serial Access Cable, 90Y9338)
Mini-USB
Warranty
The FC5022 switches carry a 1-year, customer-replaceable unit (CRU) limited warranty. When installed in
a chassis, these switches assume your system’s base warranty and any IBM ServicePac® upgrade.
Physical specifications
The approximate dimensions and weight of the switch are as follows:
Height: 30 mm (1.2 in.)

Width: 401 mm (15.8 in.)

Depth: 317 mm (12.5 in.)

Weight: 3.2 kg (7.1 lb)

The shipping dimensions and weight (approximate) of the switch are as follows:
Height: 114 mm (4.5 in.)

Width: 508 mm (20.0 in.)

Depth: 432 mm (17.0 in.)

Weight: 3.6 kg (8.1 lb)
