IBM eserver pSeries 690, User Manual

Page: 110 / 212

diag -c -d devicename -T " adapela [-s start date -e end date ]
Flag Description
-c Specifies not console mode.
-d devicename Specifies the device whose internal log you
want to analyze (for example,
SCRAID0
)
-s
start date
Specifies all errors after this date are analyzed.
-e end date Specifies all errors before this date are
analyzed.
-T Specifies the Analyze Adapter Internal Log task
Note: To specify a file name from the command line, use the redirection operator at the
end of the command to specify where the output of the command is to be sent,
for example
> filename
(where
filename
is the name and location where the
user wants to store the output data (for example,
/tmp/adaptlog
).
Backup and Restore Media
This service aid allows verification of backup media and devices. It presents a menu of
tape and diskette devices available for testing and prompts for selecting the desired
device. It then presents a menu of available backup formats and prompts for selecting
the desired format. The supported formats are tar, backup, and cpio. After the device
and format are selected, the service aid backs up a known file to the selected device,
restores that file to /tmp, and compares the original file to the restored file. The restored
file remains in /tmp to allow for visual comparison. All errors are reported.
96
Eserver
pSeries 690 User’s Guide