IBM eserver p Series, Installation Manual

Page: 65 / 76

Refer to the following diagram of the bays for the model H80, 660 models 6H0 and 6H1
when completing the table below.
1 Bay A1 - Diskette
2 Bay A2 - CD-ROM
3 Bay B1 - Optional Media
Notes:
1. If you attach a drive or other device to an adapter, record the expansion slot
number for that adapter in the Adapter field of Table 1.
2. The SCSI bus IDs in bays B1 and B2 are the recommended values. They are also
the IDs that were set when the system was shipped from the factory. Field
installations may not comply with these recommendations.
Adapter Location SCSI ID Drive Description
Integrated Bay A1 Non-SCSI Diskette Drive
Integrated Bay A2 1 CD–ROM Drive
Integrated Bay B1 0 Optional Media
1 2
3
Appendix D. System Records
51