IBM eserver iSeries 270, Installation Manual

Page: 27 / 40

__ 4. Remove the blank filler cards from the next available positions by doing
the following:
__ a.
Push outward on the latches
A
that are located at each end of the
filler card, Figure 20 on page 24.
__ b. Remove the filler card from the card socket and discard it.
__ 5.
Find the package that contains the new memory cards.
__ 6. Attention: Memory cards are fragile. Handle with care.
Remove a memory card, one at a time , from the static protective package.
__ 7. Refer to Figure 20 on page 24 to install the memory card by doing the
following: View video.
__ a. Look carefully at the notches on the bottom of the memory card. The
distance between the notches and the end of the memory card is
slightly different.
__ b.
Align the card as shown in Figure 20 on page 24.
__ c. Match the keyed notches and push down on the card until the
latches close.
Figure 19. Memory Locations on Card Assembly
Install memory
23