IBM DTLA-305040 - Deskstar 41.1 GB Hard Drive, Specifications, Page: 21 / 212

4.0 Drive characteristics
This chapter describes the characteristics of the drive.
4.1 Default logical drive parameters
The default of the logical drive parameters in Identify Device data are as shown below.
76,869,918,720 150,136,560 63 16/15 16,383 76.8 DTLA-307075
61,492,838,400 120,103,200 63 16/15 16,383 61.4 DTLA-307060
46,115,758,080 90,069,840 63 16/15 16,383 46.1 DTLA-307045
30,738,677,760 60,036,480 63 16/15 16,383 30.7 DTLA-307030
20,576,747,520 40,188,960 63 16/15 16,383 20.5 DTLA-307020
15,361,597,440 30,003,120 63 16/15 16,383 15.6 DTLA-307015
41,174,136,880 80,418,240 63 16/15 16,383 41.1 DTLA-305040
30,738,677,760 60,036,480 63 16/15 16,383 30.7 DTLA-305030
20,576,747,520 40,188,960 63 16/15 16,383 20.5 DTLA-305020
10,278,051,840 20,074,320 63 16/15 16,383 10.2 DTLA-305010
Customer Usable
Data Bytes
Word 60-61
(LBA)
Word 6
Sect/Trk)
Word 3
(Head)
Word 1 (Cyl)
Capacity
(GB)
Model
Figure 1. Default logical drive parameters
Note: 16 is the ship default value of Word 3 (Head) in Figure 1. This value can be changed by jumper.
Refer to 7.3, “Jumper Settings,” on page 0 for further information.
Deskstar 40GV & 75GXP hard disk drive specifications
9