IBM DS8000 - ADDITIONAL INFORMATION, User Manual, Page: 191 / 250

Specific trap 200 - LSS pair consistency group remote mirror and copy
pair error
This trap displays when the first remote mirror and copy pair that
is associated with the consistency group enters the suspended state
because of an error. This trap is managed by automation code.
Reporting for this trap is reenabled when either of the following
conditions occurs:
v
An extended long busy timeout occurs on the remote mirror and
copy pair that is reported in the SNMP trap.
v A consistency group-created operation is directed to the LSS pair
that is associated with the consistency group.
The following information is shown for specific trap 200:
ssEventDescr= yyyy/MM/dd hh:mm:ss tzn
-error_description-
UNIT: Mnf Type-Mod SerialNm LS LD SR
PRI: xxx tttt-ooo pp-zzzzz ll jj kk
SEC: xxx tttt-ooo pp-zzzzz ll jj
where yyyy/MM/dd hh:mm:ss tzn is the time that the alert was sent
(year, month, day, hour, minute, second, and time zone);
-error_description- is the event description; xxx is the manufacturer;
tttt-ooo is the machine type and model number; pp-zzzzz is the
serial number (a combination of the plant of manufacture and the
sequence number); ll is the LSS number in hexadecimal format; jj is
the logical volume number in hexadecimal format; and kk is the
suspension reason code (SRC) in hexadecimal format.
The suspension reason codes explain the cause of the error that
suspended the remote mirror and copy group. Table 6 explains the
suspension reason codes.
Table 6. Copy Services suspension reason codes
Suspension
reason code
(SRC) SRC explanation
X’03’ The host system sent a command to the primary volume of a remote mirror
and copy volume pair to suspend copy operations. The host system might
have specified either an immediate suspension or a suspension after the
copy completed and the volume pair reached a full duplex state.
X’04’ The host system sent a command to suspend the copy operations on the
secondary volume. During the suspension, the primary volume of the
volume pair can still accept updates but updates are not copied to the
secondary volume. The out-of-sync tracks that are created between the
volume pair are recorded in the change recording feature of the primary
volume.
X’05’ Copy operations between the remote mirror and copy volume pair were
suspended by a primary storage unit secondary device status command.
This system resource code can only be returned by the secondary volume.
X’06’ Copy operations between the remote mirror and copy volume pair were
suspended because of internal conditions in the storage unit. This system
resource code can be returned by the control unit of either the primary
volume or the secondary volume.
Appendix. Troubleshooting and analyzing problems
163