IBM Dock I, User Manual

Page: 20 / 158

Rear View
Name of Feature Description
1
Mouse/Pointing
Device Connector The mouse/pointing device connector (6-pin) connects a mouse or
other pointing device cable.
2
Serial Connector The serial connector (9-pin) usually connects a modem or
serial-printer signal cable.
3
External SCSI
Connector The external SCSI connector (60-pin) connects an external SCSI (small
computer system interface) device cable.
4
Audio-Out-Left
Jack The audio-out-left jack (left-output sound, 2-pin) connects the
audio-out-left plug of the audio cable. For stereo speaker sound of
multimedia on external stereo speakers, use this jack with the
audio-out-right jack
11
through an amplifier.
5
Speaker-In-Left
Jack
The speaker-in-left jack (left-input sound, 2-pin) connects the
speaker-in-left plug of the audio cable. Use this jack with the
speaker-in-right jack
1
for stereo speaker sound of multimedia on
the Dock I.
6
Power Cord
Connector The power cord connector connects the power cord. Power is
supplied to the Dock I and the computer. The battery pack inside the
computer is charged at the same time. Because the Dock I does not
have a power switch, power for it is controlled by the power switch
on the computer.
7
Cable Opening Used to route a cable from inside the Dock I without a slack.
1-6
IBM ThinkPad Dock I User’s Guide
Title: C74AMST CreationDate: 06/23/93 17:09:07