4
IBM Distributed Power Interconnect Rack Power Distribution Unit:Installation and Maintenance Guide
5.
While one person holds the vertical-mounting plate in the side of the rack cabinet,
attach the plate to the side braces with four M6 screws and nuts that come with
the Rack PDU.
Notes:
a.
Leave enough space to allow you to connect and disconnect power cables.
b.
If you are going to install a second vertical-mounting plate or a cable-
management bracket in the same side of the rack cabinet, leave enough
space between this vertical-mounting plate and the rear EIA mounting flanges
for the second installation.
6.
If you install a second vertical-mounting plate in the same side of the rack cabinet,
repeat steps 2 on page 3 through 5 as required; then, go to step 8 on page 5