7.6.1 INQUIRY Data Format (When Invalid LUN is Specified)
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³
BIT
³
³
7
6
5
4
3
2
1
0
³
BYTE
³
³
ÚÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
0
³
Qualifier
³
Peripheral Dev. Type=1Fh
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
1
³
RMB=0
³
Device
Ä
type Modifier = 0
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÁÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
2
³
ISO = 0
³
ECMA = 0
³
ANSI = 2
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
3
³
RSVD = 0
³
RDF = 2
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
4
³
Additional Length = 8F
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
5
Ä
6
³
Reserved = 0
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄÄÄ´
³
7
³
REL_A
³
Wb_32
³
Wb_16
³
Sync
³
Link
³
TTD
³
CmdQu
³
SftRe
³
³
³
= 0
³
= 0
³
³
= 1
³
= 1
³
= 0
³
³
= 0
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄ´
³
8
Ä
15
³
Vendor ID = 'IBM
'
(ASCII)
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
16
Ä
31
³
Product ID
(ASCII)
³
ÃÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³
32
Ä
35
³
Product Revision Level
(ASCII)
³
ÀÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
Figure 56. I N Q U I R Y D A T A Invalid L U N Specified
Qualifier is set to 011b. This indicates the L U N specified in the Command Block is not present.
2
Peripheral Dev. Type is set to 1Fh.
Removal Media Bit (RMB) is always set to zero to indicate no removal media exist.
Device-Type Modifier is set to zero.
ISO is set to zero to indicate that this product does not claim compliance to the International Organiza-
tion for Standardization (ISO) version of SCSI (ISO D P 9316).
ECMA is set to zero to indicate that this product does not claim compliance to the European Computer
Manufacturers Association (ECMA) version of SCSI (ECMA-111).
ANSI indicates the level of the ANSI standard that is supported by the product. The file supports ANSI
SCSI version 2.
RDF is set to two to indicate that the Inquiry Data Format as specified in ANSI SCSI version 2 is
supported by the file.
Additional Length indicates the number of bytes of inquiry information that follows.
REL_A is set to zero to indicate that the file does not support 'Relative Address Mode'.
Wb_32 is set to zero to indicate that the file does not support 32-bit wide data transfers.
2
F o r all commands, except inquiry and request sense, if an invalid lun is specified a check condition will be returned.
68
O E M Spec. of DCAS-34330/32160
Summary of Contents for DCAS-32160 - Ultrastar 2.1 GB Hard Drive
