IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive, Specifications

Page: 223 / 232

Key Code Qual Description
2h 5Dh 00h Not ready. Predictive Failure Analysis threshold reached.
3h 10h 00h Medium error. ID C R C error.
3h 11h 00h Medium error. Unrecovered read error.
3h 14h 01h Medium error. Record not found.
3h 16h 00h Medium error. Data synchronization mark error. (DAM error)
3h 19h 00h Medium error. Defect list error. A defect list error occurs when a data error
is detected while reading the manufacturing defect list or while reading or
writing the grown defect list.
3h 31h 01h Medium error. Medium Format Corrupted Reassign Failed
4h 01h 00h Hardware Error. N o index or sector.
4h 02h 00h Hardware Error. N o seek complete.
4h 03h 00h Hardware Error. Write fault.
4h 09h 00h Hardware Error. Track following error.
4h 0Ch 03h Hardware Write Error. Recommend Reassign.
4h 11h 00h Hardware Error. Unrecovered read error in reserved area.
4h 19h 00h Hardware Error. Defect list error.
4h 32h 00h Hardware Error. N o defect spare location available. A "no defect spare
location available sense code" indicates that the Reassign Block command
can not proceed the process because all spare sectors have been used, or it
will exceed implementation limitation of defect handling of the file.
4h 40h 80h Degrade Mode. Diagnostic Fail. Configuration sector valid check fail.
Reserved area sector valid check fail.
4h 40h 85h Degrade Mode. R A M Microcode Not Loaded.
4h 44h 00h Hardware Error. Internal target failure.
4h 81h 00h Hardware Error. Internal logic error.
5h 1Ah 00h Illegal request. Parameter list length error. The number of parameters sup-
plied is not equal to the value the expected.
5h 20h 00h Illegal request. Illegal command operation code. This command is also
returned when an unsupported command code is received.
5h 21h 00h Illegal request. Logical block address out of range.
5h 24h 00h Illegal request. Invalid field in CDB.
5h 25h 00h Illegal request. Invalid lun.
5h 26h 00h Illegal request. Invalid fields in the parameter list.
6h 28h 00h Unit attention. Not ready to ready transition.(Format completed)
6h 29h 00h Unit attention. Power on reset or Bus device reset occurred.
6h 2Ah 00h Unit attention. Parameters changed.
6h 2Ah 01h Unit attention. Mode select parameters changed.
6h 2Ah 02h Unit attention. Log select parameters changed.
SCSI SENSE D A T A
209