IBM DARA-206000 - Travelstar 12 GB Hard Drive, Specifications

Page: 175 / 206

2 All segments completed without errors. In this case, current segment pointer equals to total seg-
ments required.
4 Off-line data collection suspended by interrupting command
5 Off-line data collecting aborted by interrupting command
6 Off-line data collection aborted with fatal error
12.31.2.4 Self-test execution status
Bit Definition
0-3 Percent Self-test remaining
An approximation of the percent of the self-test routine remaining until completion in ten
percent increments. Valid values are 0 through 9.
4-7 Current Self-test execution status
0
The self-test routine completed without error or has never been run
1 The self-test routine aborted by the host
2 The self-test routine interrupted by the host with a hard or soft reset
3 The device was unable to complete the self-test routine due to a fatal error or unknown test
error
4 The self-test routine completed with unknown element failure
5 The self-test routine completed with electrical element failure
6 The self-test routine completed with servo element failure
7 The self-test routine completed with read element failure
15 The self-test routine in progress
12.31.2.5 Total Time in Seconds to Complete Off-line Data Collection Activity
This field tells the host how many seconds the device requires to complete the off-line data collection
activity.
12.31.2.6 Current Segment Pointer
This byte is a counter indicating the next segment to execute as an off-line data collection activity. Because
the number of segments is 1, 01h is always returned in this field.
12.31.2.7 Off-Line Data Collection Capability
Bit Definition
0 Execute Off-line Immediate implemented bit
0
S M A R T Execute Off-line Immediate subcommand is not implemented
1 S M A R T Execute Off-line Immediate subcommand is implemented
1 Enable/disable Automatic Off-line implemented bit
0
S M A R T Enable/disable Automatic Off-line subcommand is not implemented
1 S M A R T Enable/disable Automatic Off-line subcommand is implemented
2 abort/restart off-line by host bit
0
The device will suspend off-line data collection activity after an interrupting command
and resume it after some vendor specific event
1 The device will abort off-line data collection activity upon receipt of a new command
Command Descriptions
165