IBM Cognos User Manual Download Page 213 | Manualshive

Page: 213 / 411

background image

PowerCube Build Performance

The following preferences have an impact on PowerCube build performance.

v

<Preference Name="MultiProcessing" Value="1"/>

Use this preference to choose between the type of multiprocessing used in this
version of IBM Cognos BI and the type used in version 8.4.
In this version of the product, flat file, package and report data sources are read
using multiple threads. One thread reads data records, and another thread
processes them. This improves performance during the data read phase. In
addition, multiprocessing is supported for Unicode flat files.
In version 8.4, flat files use the IBM Cognos Series 7 type of multiprocessing,
which is less efficient, while packages and reports have no multiprocessing at
all.
By default, this preference has a value of 1 (enabled), which represents the type
of multiprocessing used in this version of IBM Cognos BI. Setting this preference
to 0 reverts multiprocessing to the type used in version 8.4.

v

<Preference Name="WorkFileCompress" Value="1"/>

Use this preference to choose whether to compress temporary files generated
during PowerCube builds. Compressing temporary files significantly improves
input/output performance.
By default, this preference is enabled (value of 1). You can disable it (value of 0)
if you are using a RAM disk or a very fast RAID disk to hold temporary work
files.

v

WorkFileMaxSize

This setting specifies the threshold number of bytes at which Cognos
Transformer splits its work files. The minimum is 1000000000 and the maximum
is 1500000000. The default value is 1500000000.

v

<Preference Name="WorkFileSortMethod" Value="1"/>

Use this preference to choose between new sorting methods introduced in this
version of Cognos Transformer and the type of sorting used in Cognos
Transformer 8.4.
This version of Cognos Transformer introduces an improved multi-threaded sort
and single-threaded sort.
You can specify the following settings for this preference:
– 0 - represents Cognos Transformer 8.4-style of sorting
– 1 - represents multi-threaded sort (default)
– 2 - represents single-threaded sort

Note:

If this preference is set to 0, temporary files created during sorting are

placed in the

temp

directory defined in IBM Cognos Configuration. In IBM

Cognos Series 7, this functionality was controlled by the

TEMPFILEDIR

setting.

v

<Preference Name="WorkFileSortThreads" Value="3"/>

Use this preference when

WorkFileSortMethod

is set to multi-threaded sort (value

of 1) to specify the number of sorting threads.
Depending on hardware resources, it may be beneficial to set this preference to 2
or 3 (default).
When

WorkFileSortMethod

is set to 1 or 2, Cognos Transformer processes the

amount of memory specified by the preference

WorkFileMaxSize

during the

sorting. The

WorkFileMaxSize

default is 1,500,000,000 bytes, which may be too

high, depending on the hardware resources and Cognos Transformer model size.
The value of

WorkFileMaxSize

should match the amount of physical memory

Chapter 9. Guidelines for Optimizing Production Environments

199

«
...
211
212
213
214
215
...
»

Summary of Contents for Cognos




























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cognos

Brand: ABB Pages: 20

Brand: ABB Pages: 24

266 HART Series

Brand: ABB Pages: 76

Brand: ABB Pages: 20

Brand: INSTROTECH Pages: 58

Brand: Uniden Pages: 31

Brand: Galaxy Pages: 12

Brand: Galaxy Pages: 11

Brand: Ham Pages: 37

Brand: Yaesu Pages: 77

Efector 800 VTV122

Brand: IFM Electronic Pages: 5

Brand: Dolphin Pages: 17

Acrylic NO-SOLDER 40M Xceiver

Brand: WA3RNC Pages: 6

Brand: Simrad Pages: 150

Brand: Questtel Pages: 15

Brand: Linear Pages: 2

Brand: YOKOGAWA Pages: 2

Brand: Jamara Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands