IBM CN4093, User Manual

Page: 26 / 62

Disconnecting the RJ-45 cable
To disconnect the RJ-45 connector, squeeze the release tab and gently pull the
cable connector out of the switch-module connector.
Locating the information panels, LEDs, and external ports
This section describes the information panels and LEDs on the switch and identifies
the external ports on the information panels.
Note: The illustrations in this document might differ slightly from your hardware.
Information panel
The front panel of the switch contains information LEDs, two SFP+ module port
connectors, two QSFP+ module port connectors, twelve Omni ports, one RS-232
serial port connector, and one Ethernet port connector.
16
CN4093 10 Gb Converged Scalable Switch: User's Guide