IBM CN4093, User Manual

Page: 27 / 62

Tx/Rx
Link
1
Tx/Rx
Link
2
Tx/Rx
Link
10Gb
40Gb
3
3
4
Tx/Rx
Link
5 6
3 4
5 6
Tx/Rx
Link
7 8
Tx/Rx
Link
9 10
10Gb
40Gb
7
7 8
9 10
Tx/Rx
Link
Mgmt
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Tx/Rx
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
Link
11
12
13
14
15
16
17
18
19
20
21
22
SFP+ ports
QSFP+ module ports
Omni Ports
RS-232 serial
management port
RJ-45 external
management port
Switch status LEDs
The switch-module information panel contains the following components:
v
LEDs that display the following information:
– The status of the switch (Power, location, and fault)
– The status of the external connections to the switch
For further details about LEDs, see “Information LEDs” on page 18.
v Two Ethernet SFP+ port connectors to attach SFP+ modules (EXT1 and EXT2).
Two QSFP+ port connectors to attach QSFP+ modules (EXT3, EXT7 or
EXT3-EXT6, EXT7-EXT10 depending on configuration). Twelve Omni Port SFP+
connectors to attach SFP+ modules (EXT11 through EXT22).
Note: These connectors are identified as EXT 1 through EXT22 in the I/O
module configuration menus and are labeled 1 though 22 (from top to
bottom) on the switch.
Chapter 2. Installing and removing the switch module
17